D15 Mini Diaphragm Brushless DC Pump & Compressor

D15 Mini Diaphragm Brushless DC Pump & Compressor

D15 is a small and exquisite brushless air pump with wide voltage power supply technology, which is especially suitable for battery-powered handheld gas sampling. It has a long life, small size, can pump negative pressure or positive pressure. When the voltage changes, the flow remains the same. Therefore, it is particularly suitable for scenarios where constant flow is required when battery power is used.

Overall Descriptions

D15 is a small and exquisite brushless diaphragm pump with wide voltage power supply technology, which is especially suitable for battery-powered handheld gas sampling. It has a long life, small size, can pump negative pressure or positive pressure. It supports wide-voltage power supply technology and can work in the range of 3.2V-5V DC. When the voltage changes, the flow remains the same. Therefore, it is particularly suitable for scenarios where constant flow is required when battery power is used.

Compact Size

The product weighs about 50g and the overall size is about 50x29x36mm. If you are looking for a miniature pump of even smaller size, you can refer to D08 miniature diaphragm air pump

 

Working Status Indicator

The bottom case of the pump is made of light-transmitting material ABS, which can visually reflect the working status of the pump through the indicator light.

 

Brushless Motor

This model is driven by brush-less motors which have the advantages of long service life, low interference and high reliability. Thepremium version of this model product, after actual testing, has a continuous working life of more than 12,000 hours under maximum load, and a motor life of more than 20,000 hours.  It has extremely high reliability and service life.

 

Diaphragm Pump With Protections

Equipped with overheating protection, overload protection and reverse connection protection function to prevent accidental damage to the pump.

 

Speed Control Feature

The flow can be changed by adjusting the motor speed of the pump (by adjusting the PWM duty cycle).

Or by ordering our company’s special speed controller for micro pump (model: TS-G12) to regulate the speed.

 

Warning Feature

Through the light color displayed by the transparent bottom case (as shown in Figure 2-1 and Figure 2-2), to feedback the working status of the pump

  1. It is normal when the blue light flashes regularly;
  2. When the light remainsred, it is abnormal, i.e.the motor runs too low;
  3. When the red and blue lights alternately flash, itis abnormal, and at this time,the motor speed is low and unstable;
  4. The indicator light is offwhen the positive and negative connections are reversed;
  5. When the voltage is outofthe working voltage range (3.2V~6V), the indicator light is off.

Technical Infomation

D15 PERFORMANCE DATA

Model

D15S

Material Option

Diaphragm: EPDM

Valves: EPDM

Pump Head: Fiber reinforced PA6

Diaphragm: FKM

Valves: FKM

Pump Head: Fiber reinforced PA6

Voltage (V DC)

5

Max. Load Current (mA)

≤280

Max. Average Flow rate (L/min)

≥0.4

Max. Peak Flow rate
 (L/min)

≥0.4

Max. Vacuum (-kPa)

≥18

Max. Pressure(kPa)

≥22

Note

The rated voltage of the product is 5V, and the load current is measured under the rated voltage. The product can work in the input voltage range of 3.2V to 6V.

D15 CONFIGRATION OPTIONS

Material Options


Pump Head

Fiber reinforced PA6

Diaphragm

EPDM

FKM

Valves

EPDM

FKM

Motor

BLDC

D15 RELIABILITY DATA

Models

D15S

Versions

Simplified

Standard

Premium

Fully Loaded Lifetime(hrs)

5000

8000

12000

Unloaded Lifetime(hrs)

8000

12000

18000

Motor Lifetime(hrs)

10000

15000

20000

Test conditions

In a clean and non-corrosive laboratory, the pump is fully loaded (the outlet is blocked, the inlet is directly connected to the atmosphere) or unloaded (the inlet and outlet are directly connected to the atmosphere), and runs continuously around the clock; ambient temperature: 5℃~33 ℃, relative humidity: 50%-85%, fluctuates with the climate.

Working Condition

Operating temperature

Permissible ambient temperature is 0℃~50℃, it is not suitable to be exposed to the sun, and it should work in a clean and ventilated environment

Medium

Permissible temperature of the medium is 5℃~50℃, the transferring gas is allowed to be rich in water vapor, but cannot contain solid particles

Wetted materials

EPDM, FKM as optional; fiber reinforced nylon,

tolerance to alcohol, acid, alkali, etc. (except strong acid, concentrated acid, lipids, benzene, gasoline, etc.)

Applications

  • Gas sampling
  • Medical equipment
  • Analytical instruments
  • Environmental online monitoring
  • Vacuum generating
  • Portable device

Downloads

D15 Mini Brushless DC Diaphragm Pump – Hilintec Micro Pumps

D15 is a small brushless diaphragm pump with wide voltage power supply technology, suitable for battery-powered handheld gas sampling.

Product SKU: C15

Product Brand: Hilintec

Product Currency: USD

Price Valid Until: 2021-11-01

Product In-Stock: InStock

Editor's Rating:
4.92

Still got some more qurestions about this product?

We are very happy to get in touch with you and provide more information

Contact Us

Contact Us