Miniature Gas Pumps
Diaphragm miniature gas pumps working in the negative and positive pressure range, it can be used to transport gas and create vacuum or compress gas.
Key Factors to Choose a Model
Vacuum
The maximum vacuum of the selected pump should be lower than the negative pressure of the actual operating point of the application
Flow Rates
You can refer to the flow-pressure curve to understand the flow-rate at the actual working point of the miniature vacuum pump
Power Supply
According to your power supply system, choose 5V/12V/24V DC or optional AC power adapter to power the miniature vacuum pump
Lifetime
According to your application needs and application load, select product versions with different no-load or full-load life
D15 Durable and High Efficiency Micro Diaphragm Pump
D15 is a small vacuum pump and compressor, this high efficiency micro diaphragm pump weighs about 40g and has an overall appearance size of approximately 40x37x25mm. While maintaining a tiny volume, the output peak flow rate can reach 3.0 L/min.This diaphragm pump has multiple motor options, brushless DC motors&brushed motors and coreless DC motor, corresponding to long-life and low-cost application scenarios. This model’s low power consumption and low inductance design meets explosion-proof certification requirements.If you are looking for pump with smaller size, please refer to D09 low pulsation product information.
VTY Flow Control Micro Vacuum Pump
VTY is a micro vacuum pump for gas. It has features like long service life, low vibration and low noise level. which is driven by 24 volt BLDC, with a compact size and high flow-rate and high vacuum,the maximum average flow rate is 11L/min and maximum vacuum is -90kPa ,It is especially suitable for scenarios constant gas sampling is required.
D40 Micro Swing Piston Compressor & Vacuum Pump
D40 is a swing piston compressor & vacuum pump with high output pressure and high vacuum. It adopts the principle of dry oil-free compressor and is driven by a small-sized and low-power DC/BLDC motor. It can output pressure up to 0.5 MPA comparable to that of a large air compressor in an extremely small size. This kind of micro piston pump run 100% oil-free, can restart after shutdown under maximum negative pressure or maximum positive pressure without pressure relief. it can achieve output pressure 500kPa and maximum flow rate 12.5L/min,with modular pneumatic connectors for easy integration into various pneumatic systems.
D70 High Vacuum Diaphragm Pump with Large Flow
D70 is a large-flow and high-vacuum DC electric air compressor pump, it is powered by 24 or 12 volt DC,This model has two motor options, corresponding to long-life and low-cost application scenarios. Its maximum peak gas flow rate is 52L/min. it can achieve vacuum degree -77kPa.To meet customer demand for higher flow and higher pressure,this diaphragm pump can be configured with single pump head and double pump head configuration.
D09 Smallest Portable Pump with Low Pulsation
D09 is a 3-chamber gas pump with a low output flow pulsation.It is equipped with iron core BLDC motor, which makes the pump long life and low power consumption,D09 is a small and exquisite diaphragm pump with 3~6V wide voltage power supply technology, which is especially suitable for battery-powered handheld gas sampling. This product has the characteristics of high pressure and large flow, it can pump negative pressure or positive pressure,the output flow can reach 0.6 L/min, the negative pressure can reach -40kPa, and the output positive pressure can reach 70kPa.
D29 High Temperature Gas Sampling Pump
D29 is a high temperature gas sampling pump specially designed for extracting high-temperature gases for CEMS application. It can be widely used in continuous high-temperature flue gas component monitoring systems and other industrial occasions where high-temperature gases need to be transmitted. Its pump body is made of 304 stainless steel and PTFE, which has good high temperature resistance and can be used to extract and compress high-temperature gases up to 250 degrees Celsius.
D27 A Creative Low Pulsation Pump for Gas Sampling
D27 is a special designed low pulsation pump with five diaphragm chambers. Comparing with the traditional diaphragm pump,there is almost no flow pulsation for this model.which is driven by a 12V/24V BLDC/DC motor,and the flow-rate can be adjusted by input PWM signal. It has a high cost performance, long service life, small dimensions.There are two models(D27E,D27M) in this series, which can output positive and negative pressure.
D11 Precision Micro Pressure Gas Pump
The D11 is a compact precision micro pressure pump with flow control function.It has a small dimensions, long service life, low vibration and low noise level.the maximum average gas flow rate is 0.9L/min,The flow rate can be controlled by adjusting the input voltage.and the flow pulsation is extremely small.so it’s very suitable for scenes that require small volume, large flow, low pressure.
VBY Micro Diaphragm Vacuum Pump Small Volume
The VBY series is a compact brushless vacuum pump, which is driven by a 12V/24V BLDC motor, has long life, high reliability, and achieves up to -80kPa vacuum in a compact size.
Selection Support
If you don’t know how to choose the most suitable model of the miniature vacuum pump, or you need us to recommend the most suitable model based on your application scenarios,
budget, and reliability requirements, or you need to customize a model
that is unique to you, we can provide you with Technical Support.