Contact Us
- +86-28-6256-7958-8001#
- MON-FRI 09:00 - 17:30, SAT 10:00 - 17:00
- UTC +8:00 Beijing Time
S17 Diaphragm Micro Water Pump
S17 Diaphragm Micro Water Pump
S17 is an industrial-grade product suitable for cost-constrained scenarios. It has a continuous working life comparable to a brushless motor fluid pump and can meet the reliability requirements of industrial-grade applications. It has a very compact size and excellent liquid transmission performance.
Contact us for the latest product information and technical support!
Overall Descriptions
S17 is an industrial-grade micro water pump suitable for cost-constrained scenarios. It has a continuous working life comparable to a brushless motor fluid pump and can meet the reliability requirements of industrial-grade applications. It has a very compact size and excellent liquid transmission performance.
Compact Size
Pollution-free transmission, maintenance-free, allowing the medium to contain water vapor, and can operate continuously for 24 hours; small size, low energy consumption.the product weighs about 75g and the overall size is about 68x29x36mm.
Brushed Motor
This model is driven by high-quality brushed motor which has the advantages of long lifetime, low interference, low energy consumption, high reliability, etc.
Gas-liquid Dual Purpose
Liquid-gas dual-use, can be used as a liquid pump or a vacuum pump, can also be used to transfer gas-liquid mixed media;
Dry-run and Self-priming
Diaphragm vacuum micro water pump has dry-running performance. When pumping gas purely, dry running will not have any effect on the working and life of the pump. At the same time, the micro water pump is also a self-priming pump, which can draw the conflicting liquid into the pump cavity by forming a vacuum.
Multiple Working Voltage Options
According to the requirements of the power supply system, users can choose 5V power supply or 12V power supply models. If you need a wide-voltage power supply liquid pump product, you can refer to S15 wide-voltage power supply brushless liquid pump.
Brushed Motor with Long Service Life
This model uses a brush motor with a limited cost, but has a working life comparable to a brushless motor. If you need higher reliability and even longer life, you can choose S15 brushless diaphragm pump.
Micro Water Pump for Liquid Transferring
It can be used to transport various types of liquids, such as water, acids, solvents, etc., with good corrosion resistance and chemical compatibility.
Technical Infomation
S17 PERFORMANCE DATA
Model | S17S | ||
Material Option | Diaphragm: EPDM Valves: EPDM Pump Head: Fiber reinforced PA6 | Diaphragm: EPDM Valves: EPDM Pump Head: Fiber reinforced PA6 | |
Voltage（V DC） | 5 | 12 | |
As Gas Pump | Max. Load Current (mA) | ≤90 | ≤40 |
Max. Average Flow Rate (L/min) | ≥0.2 | ≥0.3 | |
Max. Vacuum (-kPa) | ≥17 | ≥17 | |
As Liquid Pump | Max. Load Current (mA) | ≤200 | ≤70 |
Free Flow Rate (mL/min) | ≥15 | ≥20 | |
Max. Suction Height (mWg) | 2m | 2m | |
Flow Rate @ Max. Suction Height | 15mL/min | 15mL/min | |
Max. Pressure Height (mWg) | 3m | 3m | |
Flow Rate @ Max. Pressure Height | 15mL/min | 15mL/min | |
S17 CONFIGRATION OPTIONS
Material Options | |
Pump Head | Fiber reinforced PA6 |
Diaphragm | EPDM |
Valves | EPDM |
Motor | BDC |
S15 RELIABILITY DATA
Models | S17S |
Fully Loaded Lifetime（hrs） | 3000 |
Unloaded Lifetime（hrs） | 5000 |
Motor Lifetime（hrs） | 8000 |
Test conditions | In a clean and non-corrosive laboratory, the pump is fully loaded (continuous pumping water) or unloaded (the inlet and outlet are directly connected to the atmosphere), and runs continuously around the clock; ambient temperature: 5℃～33 ℃, relative humidity: 50%-85%, fluctuates with the climate. |
Working Condition | |
Operating temperature | Permissible ambient temperature is 0℃～50℃, it is not suitable to be exposed to the sun, and it should work in a clean and ventilated environment |
Medium | Permissible temperature of the medium is 5℃～50℃ and gaseous media is 0℃～50℃, the transferring gas cannot contain solid particles or oil mist. It is not allowed to pump oily liquid and high viscosity liquid. |
Wetted materials | EPDM, fiber reinforced nylon, tolerance to alcohol, acid, alkali, etc. (except strong acid, concentrated acid, lipids, benzene, gasoline, etc.) |
Applications
- Laboratory
- Medical equipment
- Analytical instruments
- Printing
Downloads
S17 Diaphragm Micro Water Pump – Hilintec Micro Pumps
S17 is an industrial-grade micro water pump suitable for low cost scenarios. It has a continuous working life comparable to a brushless motor.
Product SKU: S17
Product Brand: Hilintec
Product Currency: USD
Price Valid Until: 2021-11-01
Product In-Stock: InStock
Editor's Rating:
4.85
4.85
Still got some more qurestions about this product?
We are very happy to get in touch with you and provide more information