Miniature Compressor - Hilintec Micro Pumps

Miniature Pump & Compressors

Working in the positive andnegative pressure range, it can be used to transport gas and create vacuum and compress gaseous medium

Key Factors to Choose a Model

Pressue

The maximum pressure of the selected pump should be higher than the actual operating pressure point of the application

Flow Rates

You can refer to the flow-pressure curve to understand the flow-rate at the actual working point of the pump.

Power Supply

According to your power supply system, choose 5V/12V/24V DC or optional AC power adapter.

Lifetime

According to your application needs and application load, select product versions with different no-load or full-load life.

D09 Smallest Portable Pump with Low Pulsation

D09 is a 3-chamber gas pump with a low output flow pulsation.It is equipped with iron core BLDC motor, which makes the pump long life and low power consumption,D09 is a small and exquisite diaphragm pump with 3~6V wide voltage power supply technology, which is especially suitable for battery-powered handheld gas sampling. This product has the characteristics of high pressure and large flow, it can pump negative pressure or positive pressure,the output flow can reach 0.6 L/min, the negative pressure can reach -40kPa, and the output positive pressure can reach 70kPa.

D15 Durable and High Efficiency Micro Diaphragm Pump

D15 is a small vacuum pump and compressor, this high efficiency micro diaphragm pump weighs about 40g and has an overall appearance size of approximately 40x37x25mm. While maintaining a tiny volume, the output peak flow rate can reach 3.0 L/min.This diaphragm pump has multiple motor options, brushless DC motors&brushed motors and coreless DC motor, corresponding to long-life and low-cost application scenarios. This model’s low power consumption and low inductance design meets explosion-proof certification requirements.If you are looking for pump with smaller size, please refer to D09 low pulsation product information.

D23-motor-pump-diaphragm-air-compressor-45-PIN

D23 Mini Diaphragm Pump Brushless & Compressor

D23 is a diaphragm air pump that can output negative pressure and positive pressure. It has the characteristics of extremely low noise and vibration, and its noise level can be as low as 43 decibels. At the same time, it has a specially designed sealing structure with extremely high gas tightness.

D25 Mini Diaphragm Gas Pump Compressor

D25 is a kind of mini diaphragm gas pump for vacuum and compressor. It has pollution-free transmission feature. This model is maintenance-free and allowing the medium to contain water vapor. This diaphragm gas pump can operate continuously at maximum load. According to different media requirements, EPDM elastomer and FKM elastomer options can be provided.

D27 A Creative Low Pulsation Pump for Gas Sampling

D27 is a special designed low pulsation pump with five diaphragm chambers. Comparing with the traditional diaphragm pump,there is almost no flow pulsation for this model.which is driven by a 12V/24V BLDC/DC motor,and the flow-rate can be adjusted by input PWM signal. It has a high cost performance, long service life, small dimensions.There are two models(D27E,D27M) in this series, which can output positive and negative pressure.

D29 High Temperature Gas Sampling Pump

D29 is a high temperature gas sampling pump specially designed for extracting high-temperature gases for CEMS application. It can be widely used in continuous high-temperature flue gas component monitoring systems and other industrial occasions where high-temperature gases need to be transmitted. Its pump body is made of 304 stainless steel and PTFE, which has good high temperature resistance and can be used to extract and compress high-temperature gases up to 250 degrees Celsius.

D35-top-configuration-air-compressor-pump-diaphragm-mini-45

D35 Mini Diaphragm High Pressue Pump &Compressor

D35 is a small volume high pressure diaphragm pump with modular connector. Its high pressure model D35H can achieve a positive pressure of 135kPa. It is driven by a long-life brushless motor and can be used for pumping negative pressure or positive pressure. It has high reliability and rich customization options. Customers can customize the pump head material and elastomer material, and can also customize the connector type.

D40 Micro Swing Piston Compressor & Vacuum Pump

D40 is a swing piston compressor & vacuum pump with high output pressure and high vacuum. It adopts the principle of dry oil-free compressor and is driven by a small-sized and low-power DC/BLDC motor. It can output pressure up to 0.5 MPA comparable to that of a large air compressor in an extremely small size. This kind of micro piston pump run 100% oil-free, can restart after shutdown under maximum negative pressure or maximum positive pressure without pressure relief. it can achieve output pressure 500kPa and maximum flow rate 12.5L/min,with modular pneumatic connectors for easy integration into various pneumatic systems.

D50-top-configration-diaphragm-pressure-pump-air-compressor-45

D50 Mini Diaphragm Brushless DC Pump & Compressor

D50 is an electric diaphragm micro air pump driven by a brushless motor. It can be used to pump negative pressure or positive pressure. It has a variety of flow adjustment functions and can be controlled by electronic signals or touch LCD screens.

This micro diaphragm air pump can be configured with different pneumatic connectors and materials of elastomer.

Selection Support

If you don’t know how to choose the most suitable model, or you need us to recommend the most suitable model based on your application scenarios, budget, and reliability requirements, or you need to customize a model that is unique to you, we can provide you with Technical Support.

QUICK RESPONSE

We are willing to share our experience and help you solve various problems in the application of micro pumps

SUBMIT CONTACT FORM

Please leave your email or phone number, and your needs, our engineer will get in touch with you

Click Here

CUSTOMIZE

Put forward your technical requirements, we will analyze and evaluate customized solutions

SUBMIT CONTACT FORM

Please leave your email or phone number, and your needs, our engineer will get in touch with you

Click Here

APPLICATION EXPERIENCE

We are willing to share our experience and help you solve various problems in the application of micro pumps

SUBMIT CONTACT FORM

Please leave your email or phone number, and your needs, our engineer will get in touch with you

Click Here

TECHNIC SUPPORT

We regard pre-sales and after-sales technical support as one of our proud products

SUBMIT CONTACT FORM

Please leave your email or phone number, and your needs, our engineer will get in touch with you

Click Here

Miniature Pump & Compressors

Key Factors to Choose a Model

Pressue

Flow Rates

Power Supply

Lifetime

D09 Smallest Portable Pump with Low Pulsation

D15 Durable and High Efficiency Micro Diaphragm Pump

D23 Mini Diaphragm Pump Brushless & Compressor

D25 Mini Diaphragm Gas Pump Compressor

D27 A Creative Low Pulsation Pump for Gas Sampling

D29 High Temperature Gas Sampling Pump

D35 Mini Diaphragm High Pressue Pump &Compressor

D40 Micro Swing Piston Compressor & Vacuum Pump

D50 Mini Diaphragm Brushless DC Pump & Compressor

Selection Support

QUICK RESPONSE

SUBMIT CONTACT FORM

CUSTOMIZE

SUBMIT CONTACT FORM

APPLICATION EXPERIENCE

SUBMIT CONTACT FORM

TECHNIC SUPPORT

SUBMIT CONTACT FORM

Contact Us

Need Help?

I’m Here To Assist You