C61 Diaphragm Mini Air Pump for Vacuum

C61 Diaphragm Mini Air Pump for Vacuum

C61 is a large-flow electric diaphragm air pump, which is used for long-distance and large-flow gas sampling and vacuuming, and has a long service life. Its maximum average flow can reach 26.5L per minute, and the flow-rate can be adjusted by adjusting the motor speed. Its maximum relative vacuum can reach -65kPa.

Overall Descriptions

C61 is a large-flow electric vacuum pump, equipped with BLDC motor.  it is powered by 24 volt DC, with a big and controllable flow-rate, which is used for long-distance and large-flow gas sampling and vacuuming, and has a long service life. This diaphragm pump can be configured with different pneumatic connectors, different elastomer material like EPDM or FKM.

 

Vacuum Pump with Big Flow-rate

Its maximum average flow can reach 26.5L per minute, and the flowrate can be adjusted by adjusting the motor speed. Its maximum relative vacuum can reach -65kPa, Hilintec can also provide a higher vacuum product selection under the same product dimensions, please refer to C60 Mini Vacuum Pump

Modular Connector options

According to the type of customer’s pipeline, modular pneumatic connectors can be configured at the factory. It can be configured with PC6 or PC8 push-in  connectors to easily connect rigid pipes with an outer diameter of 6mm or 8mm. This pump can also configure the default conventional hose connector. In addition, it also provides Rc1/8 internal threaded connectors for connecting more abundant pipelines and interface types.

State Memory Function

When the pump is stopped due to abnormal power failure, it will continue to run according to the state and speed of the last power-off when the power supply is recovered. When the pump can work normally, touch the screen to start the pump, it will continue to run at the speed before the last shutdown. (Note: This function is only valid on the remote control type.)

 

Working Status Indicator

The remote control type and basic type are equipped with working status indicator lights, which can visually feed back the working status of the pump. The touch control type and top configuration type are equipped with an LCD touch screen that can display working status and fault codes.

 

Speed Control Function

The flow rate of the pump can be changed by adjusting the motor speed.  It provides two electirc control interface options, user can use voltage or frequency signal to control the flow-rate of C61 pump.

 

Brush-less DC Motors

This model of mini pump is driven by brush-less motors which have the advantages of long service life, low interference and high reliability.

 

Protections for This Mini Pump

Equipped with overheating protection, overload protection, power supply under-voltage and over-voltage protection and reverse connection protection function, which to the greatest extent prevents accidental damage to the pump.

 

Working Status Indication and Warning

The basic type and remote control type are equipped with working status indicator lights. Users can understand the working status of the equipment through the color change of the indicator lights:

  • When the green light is constantly on, it means that the power supply isnormal and the pump is not working;
  • When the green light flashes, it means the pump is working normally;
  • When the red light is constantly on, it means the pump is working abnormally;
  • When the positive and negative poles are reversed, the indicator light is off, the pump does not work, but it will not damage the pump.

Technical Infomation

C61 PERFORMANCE DATA

Model

C61L

Material Option

Diaphragm: EPDM

Valves: EPDM

Pump Head: Fiber reinforced PA6

Diaphragm: FKM

Valves: FKM

Pump Head: Fiber reinforced PA6

Voltage(V DC)

24

24

Max. Load Current(A)

≤1.8

Max. Average Flow rate(L/min)

≥26.5

Max. Peak Flow rate(L/min)

≥42

Max. Vacuum

(-kPa)

≥65

C61 CONFIGRATION OPTIONS

Material Options


Pump Head

Fiber reinforced PA6

Diaphragm

EPDM

FKM

Valves

EPDM

FKM

Motor

BLDC

Connector Options

Default PA hose connector/ PP hose connector/ Stainless steel hose connector/ PC6 push-in quick connector/ PC8 push-in quick connector/ PA Rc1/8 inside thread

Function Options


Basic wired control type

Knob speed control

Frequency speed control

 

C61 RELIABILITY DATA

Models

C61L

Versions

Simplified

Standard

Premium

Fully Loaded Lifetime (hrs)

5000

7500

10000

Unloaded Lifetime(hrs)

8000

12000

15000

Motor Lifetime(hrs)

10000

15000

20000

Test conditions

In a clean and non-corrosive laboratory, the pump is fully loaded (the outlet is blocked, the inlet is directly connected to the atmosphere) or unloaded (the inlet and outlet are directly connected to the atmosphere), and runs continuously around the clock; ambient temperature: 5℃~33 ℃, relative humidity: 50%-85%, fluctuates with the climate.

Working Condition

Operating temperature

Permissible ambient temperature is 0℃~50℃, it is not suitable to be exposed to the sun, and it should work in a clean and ventilated environmen

Medium

Permissible temperature of the medium is 5℃~50℃, the transferring gas is allowed to be rich in water vapor, but cannot contain solid particles

Wetted materials

EPDM, FKM as optional; fiber reinforced nylon,
tolerance to alcohol, acid, alkali, etc. (except strong acid, concentrated acid, lipids, benzene, gasoline, etc.)

Applications

  • Gas sampling
  • Medical equipment
  • Analytical instruments
  • Environmental online monitoring
  • Negative pressure debridement and suction
  • Pneumatic automation

Downloads

C61 Diaphragm Mini vacuum Pump – Hilintec Micro Pumps

C61 is a large-flow electric diaphragm vacuum pump, which is used for long-distance and large-flow gas sampling and vacuuming.

Product SKU: C61

Product Brand: Hilintec

Product Currency: USD

Price Valid Until: 2021-11-01

Product In-Stock: InStock

Editor's Rating:
4.85

Still got some more qurestions about this product?

We are very happy to get in touch with you and provide more information

Contact Us

Contact Us