| Content Prompt: Hilin Technology C25 Series Mini Vacuum Pump Successfully Listed |
The C17 series has just come out, and Hilintec has released a new product, a low-power, small-volume micro vacuum pump-the C25 series, which has officially passed the test. This series has an average flow rate of 1.5 and 2.4 L/min and a peak flow rate of 2 or 3 L/min measured at 25°C and a standard atmospheric pressure of 101 kpa.
This pump is currently divided into two types of C25L and C25S, both of which use high-quality brushed motors. The test life under full load, continuous operation hours is >1500h and >800h, and the materials contact the medium is fiber enhanced Nylon and EPDM rubber, they have good resistance to alcohol, weak acid, alkali, ozone, etc.
The C25L series has a rated voltage of 12V and the C25S series has a rated voltage of 5V. They can be driven by dry batteries or lithium batteries. They have the characteristics of small size and low power consumption. They are easy to control and use, and are particularly suitable for portable or mobile devices. This type of product is an economical product, especially suitable for occasions that have strict requirements on finished product control and do not require long-life continuous operation. For details, please consult our company's pre-sales engineer.
This pump is currently divided into two types of C25L and C25S, both of which use high-quality brushed motors. The test life under full load, continuous operation hours is >1500h and >800h, and the materials contact the medium is fiber enhanced Nylon and EPDM rubber, they have good resistance to alcohol, weak acid, alkali, ozone, etc.
The C25L series has a rated voltage of 12V and the C25S series has a rated voltage of 5V. They can be driven by dry batteries or lithium batteries. They have the characteristics of small size and low power consumption. They are easy to control and use, and are particularly suitable for portable or mobile devices. This type of product is an economical product, especially suitable for occasions that have strict requirements on finished product control and do not require long-life continuous operation. For details, please consult our company's pre-sales engineer.
